6V6 Push Pull Amps – Chasing Tone

February 23, 2019 dvnator 0

I did a longer write-up including schematic, of my solid state Peavey to 5F11 Vibrolux derivative here.

February 18, 2019 admin 0

I’ll do a longer write up soon but for now I’ll say it turned out to be a sort of Fender 5F11 Vibrolux/5E3 Deluxe sort […]

May 20, 2018 admin 2

It’s my 6V6 Trainwreck…. Full write up and schematic are here.

November 28, 2017 admin 0

This is my something like a Fender 6G3 Deluxe. I’m calling it the Ghettolux for obvious reasons. It’s a simple amp with two 6N2Ps(12AX7s) and […]

November 24, 2017 admin 0

About a week ago I got the urge to do something with one of my old amps built in a Valve Junior chassis. This amp […]

December 5, 2016 admin 2

This is the design that the Hot Toddy morphed into, the GA-40 Lite based on the Gibson GA-40. Longer write up here. This is the […]

October 30, 2016 admin 0

This is a low power, 15 or so watt, Trainwreck based amp. It sports fixed bias 6V6s at liverpool voltages and is a bit of […]

September 18, 2016 admin 0

I’ve been messing with the Hot Toddy and I’m moving away from the 6K6 power tubes. I’m not sure if it’s just this circuit abut […]

July 4, 2016 admin 0

After doing the Line 6 tube conversion, which was for a friend, I decided to make basically the same thing for myself. I really liked […]

May 8, 2016 admin 0

I’m calling this one done. I redid it since the last post. I got rid of the tremolo and am using that extra triode as […]