admin – Page 4 – Chasing Tone

February 8, 2017 admin 0

This is a switch I came up with when I wanted to add some sort of clean option to my Bedlam amp which is a […]

December 5, 2016 admin 2

This is the design that the Hot Toddy morphed into, the GA-40 Lite based on the Gibson GA-40. Longer write up here. This is the […]

October 30, 2016 admin 0

This is a low power, 15 or so watt, Trainwreck based amp. It sports fixed bias 6V6s at liverpool voltages and is a bit of […]

September 18, 2016 admin 0

I’ve been messing with the Hot Toddy and I’m moving away from the 6K6 power tubes. I’m not sure if it’s just this circuit abut […]

July 11, 2016 admin 0

This was a fairly quick build and it’s a pretty simple little amp. It uses a 5725 pentode preamp, a floating paraphase inverter from the […]

July 4, 2016 admin 0

After doing the Line 6 tube conversion, which was for a friend, I decided to make basically the same thing for myself. I really liked […]

May 26, 2016 admin 0

So I had been itching for a new amp. I already have a few but everyone knows that you can never have enough amplification. I […]

May 8, 2016 admin 0

I’m calling this one done. I redid it since the last post. I got rid of the tremolo and am using that extra triode as […]

April 29, 2016 admin 0

I think I’m just about done with the Line 6 conversion. I spent a fair amount if time tweaking it and it ended up sot […]

March 4, 2016 admin 0

So this is what I’ve been working on the past few weeks. A friend had a broken Line 6 combo amp so I am converting […]

Chasing Tone